Timer Instructions — Skope Heated Towel Rail

Simply turning the unit on will heat it to the set temperature indefinitely.

Press and hold PROG for 3 seconds to save and return to the main screen. 4. Operation Modes: Auto vs. Manual

Listen for the dynamic audible alert sequence to identify the current mode:

To switch modes: until the cursor on the screen points to "AUTO."

Common button symbols: = Program ▲ / ▼ = Adjust MODE = Auto / On / Off OK / ENTER = Confirm skope heated towel rail timer instructions

The heating element will automatically turn off after 3 hours.

Use and MIN to set the exact time you want the rail to start heating. Press PROG again. The screen will display 1 OFF .

Most Skope heated towel rail installations utilize a dedicated digital wall controller or an inline programmable timer switch. Before adjusting the settings, it helps to understand the standard interface layout. Key Buttons and Functions Enters programming mode and confirms settings.

If your unit is paired with a wall-mounted digital timer, you can set a daily routine Setting the Time: Simply turning the unit on will heat it

again to move to the "OFF" setting for that time block and adjust the time (e.g., 8:00 AM). Save & Exit : Press the

Towels generally take 2 to 3 hours to dry completely and warm through. Programming your rail to run for longer than 4 hours per session offers diminishing returns.

: While holding the buttons, reconnect the power. Release them when you hear beeps. Identify Current Mode : Listen for short beeps followed by one long beep: 1 Short Beep : Normal Mode (continuous). 2 Short Beeps : 3-Hour Timer Mode. Change Mode : Immediately after the beeps, quickly press the [Increase (+)] for 3-Hour Timer Mode. to return to Normal Mode. Operating the 3-Hour Timer

Check the display for the word AUTO . If it is missing, press the manual override button until AUTO appears. Double-check your program times to ensure morning events are set to AM and evening events to PM. Programs Lose Settings Frequently Operation Modes: Auto vs

: Disconnect the heater from the wall socket or isolation switch. Access Menu : Press and hold both the [Decrease (-)] [Increase (+)] buttons simultaneously. Restore Power

Integrating a timer with your Skope heated towel rail is the best way to enjoy warm towels without wasting electricity. While specific models (like the KTX or Terma series often paired with Skope) can vary, most utilize a standard digital interface or a Bluetooth-connected app. 1. Understanding the Interface

Tip: Set it to turn off just after you leave for work or after the morning rush.