You cannot update firmware without the full IDE runtime. However, you can copy the firmware .bin file to your portable drive and run the IDE from there.
Carel does not officially distribute a standalone "portable" version (such as a single executable that runs off a USB drive without installation) of 1tool or pCOManager.
Extract the inner application files to a dedicated folder (e.g., C:\PortableApps\Carel1tool\ ). Copy this folder directly to your USB drive.
Which (e.g., pCO3, pCO5, pCO Compact) are you targeting? carel pco programming software download portable
To connect to a pCO controller via a hardware key (like the smart key, pCO Manager key, or USB-to-RS485 converter), specialized device drivers must be installed into the Windows operating system.
: Software like 1tool or c.suite often requires a license or hardware key for full functionality.
If you encounter issues with the portable version of the CAREL pCO programming software: You cannot update firmware without the full IDE runtime
: The current standard for development on the c.pCO family. It is a modular suite including c.strategy (logic) and c.mask (UI).
Insert the USB drive containing the new software. The controller display will typically show UE during the process, which can take up to 5 minutes.
Software is nothing without the cable. For a portable setup, keep this in your USB kit: Extract the inner application files to a dedicated folder (e
Once your portable environment is launched, establishing a connection requires specific hardware interfaces:
Write a simple batch file ( .bat ) on your USB drive to automate the registration of dependencies and launch the executable. A basic template looks like this:
Using WinLoad32, you can upload the Boot, BIOS, Application, and Configuration files . However, note that updating the BOOT is generally NOT recommended by CAREL unless strictly instructed, as it can disrupt unit operation if interrupted. Typically, you will only load the application .hex or .blx files.