Hp 18e7 Motherboard Specs Top !!hot!! Jun 2026

The HP 18E7 is a proprietary motherboard, usually designed for small form factor (SFF) or micro-tower PCs. It is built around a robust chipset designed to support Intel processors. 1. Processor Support (CPU)

| Category | Specification | | :--- | :--- | | | HP Inc. | | Model Number | 18E7 (also seen as 18E7 VER 1.0) | | Form Factor | Proprietary (custom for AIO; approximate dimensions: ~200mm x 180mm) | | Chipset | Intel H81 (most common) or H110 (check variant) | | CPU Socket | LGA 1150 (for H81) or LGA 1151 (for H110) | | Supported Processors | Intel 4th gen (Haswell) Core i3/i5/i7, Celeron, Pentium | | Memory Type | DDR3 (2x SODIMM slots) or DDR4 (rare; check label) | | Max Memory | 16 GB (8 GB per slot) | | Memory Speed | 1333 / 1600 MHz | | Storage Interfaces | 1x SATA 3.0 (6 Gb/s), 1x SATA 2.0 (3 Gb/s) | | Expansion Slots | 1x Mini PCIe (for WiFi/BT), 1x half-height PCIe x1 (rare) | | Integrated Graphics | Intel HD Graphics 4400/4600 (depends on CPU) | | Rear I/O | 2x USB 3.0, 2x USB 2.0, 1x RJ45 (Gigabit LAN), 1x VGA, 1x HDMI (some), 1x Audio out/mic | | Internal Headers | 1x 4-pin CPU fan, 1x 3-pin system fan, front USB 2.0/3.0, power button, audio, LVDS (for internal AIO display) | | Power Connector | 4-pin 12V DC input (external power brick, ~90W-120W) | | LAN Controller | Realtek RTL8111 series | | Audio Codec | Realtek ALC662 or ALC269 |

1 VGA port, 2 DisplayPort (DP) connectors (supports dual-monitor setup out-of-the-box).

DDR4 SDRAM (Note: While some similar boards support DDR3, this specific 18E7 iteration primarily supports high-speed DDR4 to maximize memory bandwidth). hp 18e7 motherboard specs top

M.2 Slots: None (standard for this era; requires a SATA SSD) Integrated Graphics and Audio

: Proprietary (specifically tailored for HP ProDesk 600 G1 chassis). Processor & Performance

HP IPM87-MP LGA1150 DDR3 Desktop MotherBoard 707825-001 785304-001 Go to product viewer dialog for this item. HP 611834-001 System board assembly The HP 18E7 is a proprietary motherboard, usually

: 4 × USB 3.0 (SuperSpeed) ports alongside 2 to 6 × USB 2.0 ports.

Storage:Usually equipped with four SATA 3.0 (6 Gb/s) ports for connecting HDDs, SSDs, and optical drives. Integrated Graphics and Audio

Power Supply: HP uses a proprietary 6-pin power connector rather than the standard ATX 24-pin. To use a standard PSU, you will need a 24-pin to 6-pin adapter. Processor Support (CPU) | Category | Specification |

Proprietary HP form factor. It uses customized mounting holes and standard-disrupting front panel connections tailored exclusively to fit HP ProDesk chassis lines.

utilizes the Intel Q150 chipset. This chipset supports Intel's 6th Generation Core processors (Skylake) and provides robust management features (Intel vPro) suited for IT departments. LGA 1151 (Socket H4).

Here are some of the pros and cons of the HP 18E7 motherboard:

| Component | Specification | | :--- | :--- | | | Custom uATX (specifically designed for HP AIO chassis) | | CPU Socket | LGA 1150 (Supports Intel 4th Generation "Haswell") | | Chipset | Intel H87 Express | | Memory (RAM) | 2 x DDR3 DIMM Slots • Type: DDR3-1600 (PC3-12800) • Max Capacity: 16GB (8GB per slot) • Note: Does not support DDR3L (low voltage) exclusively; standard 1.5V DDR3 is preferred. | | Video Output | Integrated Intel HD Graphics (Dependent on CPU) • Ports: Usually 1x HDMI (Input/Output switchable on some models) | | Storage | • SATA Ports: 4 x SATA III (6.0 Gb/s) • mSATA: 1 x mini-PCIe/mSATA slot (often used for Wi-Fi card or small SSD cache) | | Expansion Slots | • 1 x PCIe x16 (Gen 3.0) - Low Profile required • 1 x PCIe x1 - Low Profile required • 1 x Mini-PCIe | | Audio | Realtek ALC671 (7.1 Channel Audio) | | LAN | Realtek RTL8111HSE Gigabit Ethernet (10/100/1000) | | USB | • USB 3.0 Ports (Blue): Usually 2 rear + 2 internal header • USB 2.0 Ports: Multiple (Black) |

This compatibility table shows the chip support: