If you want, paste the device's full USB descriptor output (lsusb -v or the Windows Hardware Ids + iManufacturer/iProduct strings) and I will identify likely vendor, device class, and next steps.
Users hunting down this hardware ID typically encounter errors like "Please Insert Disk," "Write Protected," or "0 Bytes / No Media" in Windows Disk Management.
This mismatch between the reported and actual capacity means the device is likely a "fake." Using such a drive can lead to data loss or corruption when you attempt to write more data than the physical hardware can store.
controller. You'll often find these controllers in budget or unbranded USB drives, including some "fake" high-capacity drives sold on online marketplaces. Common Issues and Solutions
: The information provided in this report is limited and based on available data. For more detailed information, additional research or device-specific tools may be required. Usb Device Id Vid 1e3d Pid 198a
For the most serious issues, only software used at the factory will work. This is where the comprehensive information from the VID/PID becomes invaluable, as it tells you which tool is compatible. These powerful tools, commonly referred to as "量产工具" (mass production tools), can perform low-level formatting and re-flash the controller's firmware.
The specific PID 198A identifies the controller. Within its broader "CBM209X" controller series, it's one of the most widespread low-cost, USB 2.0 flash drive controllers on the market. The appearance of this PID serves as an immediate diagnostic clue, suggesting the drive is likely a budget or promotional item with a USB 2.0 interface. Common flash storage types used with this controller are Single-Level Cell (SLC), Multi-Level Cell (MLC), and Triple-Level Cell (TLC), with the latter being popular for cost-effective higher capacities.
When you connect a USB device to a computer, the operating system uses the VID and PID to identify the device and install the appropriate driver.
When parsed by low-level hardware diagnostics tools (such as ChipGenius or Flash Drive Information Extractor), a functional device under this ID typically reports the following technical profile: If you want, paste the device's full USB
Because this drive is based on a ChipsBank controller, generic Windows formatting tools often fail. You need specialized ChipsBank controller tools. Method 1: Using ChipsBank APTool (Flash Utility) This is the most effective way to repair these drives.
The USB hardware string uniquely identifies a USB Mass Storage Device powered by a Chipsbank Microelectronics controller . When operating system diagnostics flag this specific code, the device is almost always a budget-friendly USB flash drive, a promotional "giveaway" thumb drive, or a generic SD card reader. Understanding this hardware ID combination is crucial for data recovery, repairing corrupted thumb drives, or identifying unbranded hardware. Decoding the Hardware Identity: VID 1E3D and PID 198A
The device appears to the host computer as a composite USB device. When connected via USB, it typically loads drivers that bridge the connection to the diagnostic software. While the device supports wireless operation, the USB connection (identified by this VID/PID) is often used for firmware updates or in environments where radio interference is a concern.
: Because ChipsBank controllers are inexpensive, they are often found in promotional "giveaway" USB sticks or generic drives sold on platforms like AliExpress. Troubleshooting & Tools controller
: Registered to Chipsbank Microelectronics Co., Ltd., a Chinese semiconductor company specializing in flash memory controllers.
: Most versions of this specific device operate on High-Speed USB 2.0 (up to 480 Mbps) rather than the faster USB 3.0+ standards.
Here is the detailed technical content regarding the USB device identified by and PID 198A .