Deckma Omd11 Manual Free

The unit contains a desiccant bag to prevent internal condensation. This should be checked and replaced if the color indicates it is saturated. Troubleshooting Common Faults

For more information on the Deckma OMD11 or to obtain a copy of the manual, please contact:

This article is a comprehensive reference guide based on aggregated public resources. For exact, model-specific procedures and safety warnings, always refer to the official manufacturer's manual. If you require the official documentation, it can be found as part of the package at libramar.net .

The OMD-11 measures the concentration of oil in bilge water discharge. It uses an optical measuring cell to detect scattered light, ensuring that no effluent exceeding 15ppm is pumped overboard. deckma omd11 manual

0–30 ppm (Trend indication up to 50 ppm). Accuracy: Better than ±5 ppm (within IMO requirements). Power Supply: 24V AC/DC ±15% (5 VA consumption).

If the display reads higher than zero despite clean water flushing, use the adjustment screw on the main circuit board to reset the baseline to zero.

The OMD-11 was developed by DECKMA HAMBURG GmbH to improve the reliability and operation of 15 ppm bilge alarms. It represents a new generation of monitors designed to overcome issues encountered with older systems, particularly regarding false alarms caused by solid particles commonly found in bilge water. This improvement in solids suppression is a key feature, allowing the OMD-11 to differentiate between oil particles and other solids like iron oxide, providing a more accurate reading of actual oil content. The unit contains a desiccant bag to prevent

A dedicated LED indicates a system fault, which can occur if the power supply fails or if there is a malfunction in the measuring cell. 5. Maintenance and Calibration

is a globally recognized leader in maritime monitoring technology, and their OMD-11 Oil Mist Detector is a cornerstone of modern engine room safety. Designed to comply with SOLAS regulation II-2/15.2.9, the OMD-11 continuously monitors crankcase atmospheres for explosive oil mists—a critical early warning system against engine blowbacks and crankcase explosions.

: Two independent circuits, factory-set at 15 ppm (adjustable from 2–15 ppm). Power Supply It uses an optical measuring cell to detect

Deckma OMD-11 is a legacy bilge alarm unit designed to monitor oil-in-water concentrations in marine environments, specifically to ensure compliance with IMO Resolution MEPC.60(33) standards. Core Function & Features

0–20 mA or 4–20 mA analog output for external recording.

The Deckma OMD11 manual includes a troubleshooting guide to help you identify and resolve common issues, such as:

Even without the physical document onboard, the routine below is universal. Always cross-check page numbers with your revision:

It must be placed as close as possible to the oily water separator. The distance must never exceed 8 meters to ensure a response time under 20 seconds, as required by IMO regulations.